Chevrolet Camaro [Segunda Geração 1970–1981]

1970 - 1981

• The second generation Chevrolet Camaro is a pony car by the Chevrolet division of General Motors produced for the 1970 through 1981 model years. It was introduced February 26, 1970[1] It was longer, lower, and wider than the first generation Camaro, and is "widely considered the best all-around domestic musclecar ever produced." A convertible body-type was no longer available. GM engineers have said the second generation is much more of "A Driver's Car" than its predecessor.
• Dubbed "Super Hugger", the second generation Camaro was developed without the rush of the first generation and benefited from a greater budget in light of the success of the first generation. Although it was an all-new car, the basic mechanical layout of the new Camaro was familiar, engineered much like its predecessor with a unibody structure utilizing a front subframe, A-arm and coil spring front suspension, and rear leaf springs. The chassis and suspension of the second generation were greatly refined in both performance and comfort; base models offered significant advances in sound-proofing, ride isolation, and road-holding. Extensive experience Chevrolet engineers had gained racing the first-generation led directly to advances in second-generation Camaro steering, braking, and balance. Although it began its run with a number of high performance configurations, as the 1970s progressed, the Camaro grew less powerful, succumbing, like many production cars of the era, to the pressures of tightening emissions regulations and a fuel crisis. Major styling changes were made in 1974 and 1978; 1981 was the final model year for the second generation Camaro.
• Models and changes 1970–1981
• 1970 350 LT-1 in a 1970 Z-28
  Most of the engine and drivetrain components were carried over from 1969, with the exception of the 230 cu in (3.8 L) six cylinder — the base engine was now the 250 cu in (4.1 L) six, rated at 155 hp (116 kW). The top performing motor was the 396 cu in (6.5 L) L78 rated at 375 hp (280 kW). Starting in 1970, the big block V8s (nominally 396 cu in (6.5 L)) actually displaced 402 cu in (6.6 L), yet Chevrolet chose to retain the 396 badging. Two 454 cu in (7.4 L) engines (the LS6 and LS7) were listed on early specification sheets and in some sales brochures but never made it into production. Besides the base model, buyers could select the Rally Sport option with a distinctive nose and bumper, a Super Sport package, and the Z-28 Special Performance Package (priced at US$572.95)[1] featuring a new high-performance LT-1 360 hp (268 kW) 380 lb·ft (520 N·m) of torque 350 cu in (5.7 L) V8. The LT-1, an engine built from the ground up using premium parts and components, was a much better performer overall than the previous 302 cu in (4.9 L) V8s used in 1967-69 Z-28s; greater torque and less-radical cam, coupled with the 780 cfm Holley four-barrel, permitted the Z-28 to be available with the 3-speed Turbo Hydramatic 400 automatic transmission as an option to the four-speed manual for the first time.
• The new body style featured a fastback roofline and ventless full door glass with no rear side quarter windows. Doors were wider to permit easier access to the rear seat and new pull-up handles replaced the old handles for which the lower button had to be pushed in to lock the door. The roof was a new double-shell unit for improved rollover protection and noise reduction. The base model featured a separate bumper/grille design with parking lights under the bumper while the Rally Sport option included a distinctive grille surrounded by a flexible Endura material along with round parking lights beside the headlights and bumperettes surrounding on both sides of the grille. The rear was highlighted by four round taillights similar to the Corvette. A convertible was not offered, making this the only Camaro generation not to offer one.
  The '70½ was the first Camaro offered with a rear stabilizer bar. The four-wheel disc brake option (RPO JL8 of 1969) was dropped.
• Inside, a new curved instrument panel featured several round dials for gauges and other switches directly in front of the driver while the lower section included the heating/air conditioning controls to the driver's left and radio, cigar lighter and ashtray in the center and glovebox door on the right. New Strato bucket seats, unique to 1970 models, featured squared off seatbacks and adjustable headrests and the rear seating consisted of two bucket cushions and a bench seat back due to the higher transmission tunnel. The optional center console, with standard Hurst shifter,[1] was now integrated into the lower dashboard with small storage area or optional stereo tape player. The standard interior featured all-vinyl upholstery and a matte black dashboard finish while an optional custom interior came with upgraded cloth or vinyl upholstery and woodgrain trim on dash and console.
• The 1970 model was introduced in February 1970, halfway through the model year. This caused some people to refer to it as a "1970½." model; all were 1970 models. The 1970 model year vehicles are generally regarded as the most desirable of the early 2nd generation Camaros, since the performance of following years was reduced by the automobile emissions control systems of the period and later the addition of heavy federally mandated bumpers.
• 1971 Chevrolet Camaro Z28
  The 1971 Camaro received only minor appearance changes from its 1970 counterpart. Inside, new high-back Strato bucket seats with built-in headrests replaced the 1970-only low-back seats with adjustable headrests. The biggest changes came under the hood due to a GM-corporate mandate all engines be designed to run on lower-octane regular leaded, low-lead, or unleaded gasoline, necessitating reductions in compression ratios and horsepower ratings. The 250 ci 6, 307 ci V8 and two-barrel 350 V8 were virtually unchanged as they were low-compression regular-fuel engines in 1970 and previous years, while the LT-1 350 V8 used in the Z/28 dropped from 360 to 330 horsepower (250 kW) due to compression ratio decline from 11.0:1 to 9.0:1, and the big 396/402 V8 dropped from 350 to 300 horsepower (220 kW) due to compression ratio drop from 10.25:1 to 8.5:1.
• Production and sales dropped due to a 67-day corporate-wide strike at GM that coincided with the introduction of the 1971 models in late September 1970, along with a continued declining interest in the ponycar market fueled by skyrocketing insurance rates for high-performance cars. Rumors of the possible cancellation of the Camaro after 1972 began to surface and were nearly confirmed a year later when another worker's strike hit the assembly plant at Norwood, Ohio, which was the only plant building Camaros and Firebirds. Production had been discontinued at the Van Nuys, California plant in 1970 in favor of Chevy Novas.
• 1972 Camaro RS
  The 1972 Camaro suffered two major setbacks. The UAW strike at a GM assembly plant in Norwood disrupted production for 174 days, and 1,100 incomplete Camaros had to be scrapped because they could not meet 1973 federal bumper safety standards. Some at GM seriously considered dropping the Camaro and Firebird altogether, particularly while the corporation was under pressure to adapt its vast number of makes and models to difficult new regulations for emissions, safety, and fuel economy. Others pointed out the fiercely loyal followings the cars enjoyed and were convinced the models remained viable. The latter group eventually convinced those in favor of dropping the F-cars to reconsider, and Chevrolet would go on to produce 68,656 Camaros in 1972. 970 SS396s were produced in 1972, and this was the last year for the SS model. This year the badging changed from "Z/28" to "Z28". Horsepower ratings continued to drop, not only due to lower compression and tighter emissions but, beginning with the 1972 model year, a switch from gross (on dynometer) to net ratings based on an engine in an actual vehicle with all accessories installed. With that, the 350 ci LT1 dropped from 330 gross horsepower in 1971 to 255 net for 1972 and the big-block 396/402 was now rated at 240 net horsepower compared to 300 gross horses in 1971.
  
  
• 1973 Chevrolet Camaro Z28
  The 1973 model year incorporated standard impact-absorbing front bumper system to met new no-damage at 5 miles per hour (8.0 km/h) NHTSA safety legislation. The Rally Sport option with its chrome bumperettes on either side of an impact absorbing urethane grill surround continued for one more year due to creative bracing behind the front sheetmetal.
• A new Type LT model was offered in 1973, with a quieter and better appointed interior, full instrumentation, Rally-style wheels, variable-ratio steering, sport mirrors, and hidden windshield wipers among other upgrades. The Super Sport package was dropped, and the big block 396 cu in (6.5 L) V8 was no longer available. Power was down due to new emissions standards, with the top rated 350 cu in (5.7 L) V8 producing 245 hp (183 kW; 248 PS) in the Z28. The engine also switch from solid-lifters to hydraulic tappets. Air conditioning became available as an option with this engine. The Z28 option could be ordered on both the sport coupe and LT models. When the Z28, Type LT, and Rally Sport options were combined, the usual Z28 badges, stripes, and graphics were deleted.
• Other changes included a new console-mounted shifter for automatic transmissions similar to the Rally Sport Shifter used in Pontiac Firebirds replacing the Buick-like horseshoe shifter of previous Camaros, and the reintroduction of power windows to the option list for the first time since 1969 with the switches mounted in the console.
  Recovering from the strike, Camaro sales increased to 96,751 units during a record sales year industry-wide.