Corvette Sting Ray




1963 - 1967

  • The second generation Corvette referred to as mid-years was designed by Larry Shinoda with major inspiration from a previous concept design called the "Q Corvette" by Peter Brock and Chuck Pohlmann under the styling direction of Bill Mitchell. The design had several inspirations. The first was the contemporary Jaguar E-Type, one of which Bill Mitchell owned and enjoyed driving frequently. Mitchell also sponsored a car known as the "Mitchell Sting Ray" in 1959 because Chevrolet no longer participated in factory racing. This vehicle had the largest impact on the styling of this generation, although it had no top and did not give away what the coupe would look like. The third inspiration was a Mako Shark Mitchell had caught while deep-sea fishing.
    Production started for the 1963 model year and ended in 1967. Introducing a new name, "Sting Ray", the 1963 model was the first year for a Corvette coupe and it featured a distinctive tapering rear deck (a feature that reappeared on the 1971 "Boattail" Buick Riviera) with, for 1963 only, a split rear window. The Sting Ray featured hidden headlamps, non-functional hood vents, and an independent rear suspension.[3] Duntov never liked the split rear window because it blocked rear vision, but Mitchell thought it to be a key part of the entire design. Maximum power for 1963 was 360 bhp (270 kW) and was raised to 375 bhp (280 kW) in 1964. Options included electronic ignition, the breakerless magnetic pulse-triggered Delcotronic first offered on some 1963 Pontiac models. On 1964 models the decorative hood vents were eliminated and Duntov got his way with the split rear window changed to a full width window.
  • 1965 Corvette Sting Ray Coupe
    Four-wheel disc brakes were introduced in 1965, as was a "big block" engine option, the 396 cu in (6.49 L) V8. Side exhaust pipes were also optional in 1965 and continued through 1967. The introduction of the 425 bhp (317 kW) 396 cu in (6.49 L) big block in 1965 spelled the beginning of the end for the Rochester fuel injection system. The 396 cu in (6.49 L) option cost US$292.70 while the fuel injected 327 cu in (5.36 L) engine cost US$538.00. Few people could justify spending US$245.00 more for 50 bhp (37 kW) less, even if the FI cars offered optional bigger brakes not available on carbureted models.[3] With only 771 fuel-injected cars built in 1965, Chevrolet discontinued the option the following year. Chevrolet would up the ante in 1966 with the introduction of an even larger 427 cu in (7.00 L) Big Block version, creating what would be one of the most collectible Corvettes ever. Other options available on the C2 included the Wonderbar auto-tuning AM radio, AM-FM radio (mid 1963), air conditioning (late 1963), a telescopic steering wheel (1965) and headrests (1966).
  • 1967 Corvette Sting Ray Convertible
    1967 was the final year for the C2 generation. It featured restyled fender vents, less ornamentation and the first use of all four taillights in red; back-up lamps were now rectangular, centrally located. (The all-four red taillight treatment continued on the first C3 in 1968 only and returned on the first C4 in 1984, continuing on all Corvettes since). 1967 had the first L88 engine option which was rated at 430 bhp (320 kW), but unofficial estimates place the actual output at 560 bhp (420 kW) or more. Only twenty such engines were installed at the factory. From 1967 (to 1969), the Holley triple two-barrel carburetor, or Tri-Power, was available on the 427 L89 (a US$368 option, on top of the cost for the high-performance 427). Despite these changes, sales slipped over 15%, to 22,940 (8,504 coupes, off close to 15%, and 14,436 convertibles, down nearly 19%).
    Corvette chief engineer Zora Arkus-Duntov came up with a lightweight version of the C2 in 1962. Concerned about Ford and what they were doing with the Shelby Cobra, GM planned 100 Grand Sport Corvettes but only five were built. They were driven by historic drivers such as Roger Penske, A. J. Foyt, Jim Hall, and Dick Guldstrand among others. Today the cars 001-005 are all held by private owners, and are among the most coveted and valuable Corvettes ever built. The C3 was originally intended to be introduced for the 1967 model year; however, quality issues delayed its introduction until the following year.
    Fonte: http://en.wikipedia.org
  • Características técnicas

    Motor (Engine)--------------------------------------------------Dupla árvore de cames aéreos, V8
    Posição (Position)---------------------------------------------Frente Longitudinal
    Válvulas (Valvetrain)-------------------------------------------2 válvulas por cilindro; 16 válvulas no total
    Cilindrada (Displacemente)---------------------------------5354 cc
    Binário (Torque)-------------------------------------------------477,0 Nm (352 ft · lb ) (48,6 kgm ) @ 4000 rpm
    Potência (Power)-----------------------------------------------365 PS (360 cv ) (268,5 kW ) @ 6000 rpm
    Comprimento (Length)----------------------------------------4453 mm
    Largura (Width)--------------------------------------------------1770 mm
    Altura (Heigth)---------------------------------------------------1275 mm
    Velocidade Máxima (Top Speed)-------------------------237 km/h
    0-100 km/h--------------------------------------------------------
    Caixa de velocidades (Transmission)-------------------Manual 4 velocidades